- Dụng cụ chuẩn bị để ‘câu’ điện cho ắc quy
- Các bước câu nối ắc quy điện
- Bước 1: Làm sạch
- Bước 2: Đấu nối
- Bước 3: Khởi động xe
- Bước 4: Tháo dây nối
- Bước 5: Vận hành xe
- Lưu ý quan trọng khi câu bình ắc quy
Nếu chẳng may ắc quy bị hết điện giữa đường, các tài chỉ cần chuẩn bị một vài dụng cụ là có thể câu điện cho ắc quy xe của mình một cách nhanh chóng và hiệu quả trước khi có thể ‘lết’ được tới garage gần nhất.
Gợi ý cách ‘câu’ điện ắc quy ô tô khi chẳng may chết máy giữa đường.
Câu điện cho bình ắc quy không khó, quan trọng là các chủ xe phải có sự chuẩn bị dụng cụ cần thiết cho việc ‘cấp cứu’ xe.
Dụng cụ chuẩn bị để ‘câu’ điện cho ắc quy
Để câu nối ắc quy điện thì đầu tiên cần phải chuẩn bị bộ 2 dây nối bình điện (dài hơn 2m) nhằm để nối dây và sự trợ giúp của một xe khác.
Cần chuẩn bị bộ 2 dây nối bình điện (dài hơn 2m) nhằm để nối dây và sự trợ giúp của một xe khác.
Bên cạnh đó, việc đỗ 2 xe đối diện nhau sẽ giúp việc nối dây điện cho nhau dễ dàng hơn. Trong 2 sợi, thì thường sợi đỏ sẽ nối cực dương (+) và sợi đen nối cực âm (-) của bình điện.
Các bước câu nối ắc quy điện
Để câu ắc quy, các tài có thể thực hiện theo các bước sau:
Bước 1: Làm sạch
Làm sạch khoang động cơ, các tiếp điểm đầu cực cũng như kiểm tra khoang động cơ. Cần đảm bảo rằng không có xăng, dầu rò rỉ để phòng nguy cơ cháy nổ khi kích điện.
Đồng thời, cần tắt thiết bị điện trên xe (DVD, quạt, đèn…) để đảm bảo ắc quy đủ tải kích điện.
Bước 2: Đấu nối
Dùng đầu kẹp đỏ nối cực dương (+) của bình xe hết điện với cực dương (+) của xe đang trợ giúp.
Sau đó, dùng 1 đầu kẹp của dây đen, kẹp chúng vào cực âm (-) của xe hỗ trợ. Đầu dây đen còn lại hãy kẹp vào bất kỳ bộ phận kim loại nào không phủ sơn của xe có ắc quy hết điện (lốc máy, sườn xe,…). Cần nhớ rằng tuyệt đối không nối vào cực (-) của xe cần trợ giúp.
Bước 3: Khởi động xe
Khởi động xe hỗ trợ (xe cho điện), giữ động cơ ở chế độ tải trong 3 – 5 phút để sạc cùng lúc cho 2 bình ắc quy. Sau 3 – 5 phút, khởi động lại xe hết điện.
Nếu vẫn chưa thể khởi động được, tiếp tục để ắc quy điện sạc thêm vài phút nữa trước khi khởi động lại. Cứ tiến hành vài lần cho đến khi xe ô tô có thể nổ máy.
Khởi động xe hỗ trợ (xe cho điện), giữ động cơ ở chế độ tải trong 3 – 5 phút để sạc cùng lúc cho 2 bình.
Bước 4: Tháo dây nối
Khi xe đã nổ máy, hãy tháo dây nối điện. Lưu ý, cần tháo 2 đầu kẹp của dây đen (-) trước và đảm bảo rằng các đầu kẹp không tiếp xúc nhau để tránh gây cháy, nổ. Dây đỏ (+) sẽ tháo sau.
Bước 5: Vận hành xe
Để động cơ xe vận hành khoảng 5 – 10 phút nhưng không sử dụng các thiết bị điện, để sạc ắc quy điện xe trước khi tiến hành di chuyển.
Lưu ý quan trọng khi câu bình ắc quy
Để việc ‘cứu trợ’ xe có ắc quy hết điện đảm bảo an toàn, người dùng cần lưu ý rõ một số vấn đề sau:
- Không hút thuốc lá, dùng bật lửa hoặc đỗ xe ở gần nguồn gây cháy khi thực hiện.
- Khi câu bình, hãy đeo găng tay để thao tác, tránh tiếp việc xúc trực tiếp vì chẳng may axit của ắc quy dính vào dễ gây bỏng da.
- Không khởi động xe nhiều lần bởi sẽ khiến ắc quy dễ bị hỏng.
- Không chạm vào xe khi đang câu ắc quy vì nguy cơ bị điện truyền qua người.
- Chỉ áp dụng phương pháp đẩy xe với trường hợp là ô tô số sàn.
Khi câu bình, hãy đeo găng tay để thao tác.
Trên đây là gợi ý cách câu điện cho ắc quy khi chẳng may hết điện giữa đường. Đây chỉ là giải pháp tạm thời nên sau đó các tài cần mang xe đến trung tâm để được hỗ trợ khắc phục.